H41X-10 flange Muffler check valve

Nominal pressure: PN1.0MPa Nominal diameter: DN40 ~ DN300 Applicable medium: water, oil, steam and non corrosive media Suitable temperature: ≤50℃ The main components of the material: grey cast iron, nitrile rubber Test standard: GB/T13927-2008

  • Model No.: DN40,50,65,80,100,125,150,200,250,300
  • Brand: JG
  • Name:: flange Muffler check valve
  • Original: China

Brief introduction

This valve is used for industrial pipe to prevent the flow of the medium flow valve open and close, can be horizontal or vertical installation, medium flow and valve body is the same direction.

Valve flap with two ends of the central axis oriented, open and close flexible, spring loaded, its fast closing can effectively reduce the water hammer pressure, good sealing performance, close without noise, it has a small size, light weight, fatigue, long life and so on.

Main parameters

Nominal pressure: PN1.0MPa

Nominal diameter: DN40 ~ DN300

Applicable medium: water, oil, steam and non corrosive media

Suitable temperature: ≤50℃

The main components of the material: grey cast iron, nitrile rubber

Test standard: GB/T13927-2008

2015_8_23_17_73333_0_2412_副本.jpg

 

MetInfo enterprise content manager system | MetInfo CMS

 

MetInfo enterprise content manager system | MetInfo CMS

 

MetInfo enterprise content manager system | MetInfo CMS

 

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS