DH77X-10/16 clip check valve

Nominal pressure: PN1.0MPa ~ 1.6MPa Nominal diameter: DN40 ~ DN600 Applicable temperature and suitable medium: according to different kinds of plastic Main component material: gray cast iron Executive standard: GB/T8937-2010 Test standard: GB/T13927-2008

  • Model No.: DN40,50,65,80,100,125,150,200,250,300,350,400,450,500,600
  • Brand: JG
  • Name:: DH77X-10/16 clip check valve
  • Original: China

Brief introduction

This valve is used to prevent the pipeline and equipment used in the medium of the valve, the butterfly board uses dual plate on the two torsion spring design, can make the valve plate in the pressure to open and close. According to the needs of users, and choose a different type of adhesive and other components. Body structure length is short series, good rigidity, easy to install, use the performance of safety and reliability, good anti - jamming.

Main parameters

Nominal pressure: PN1.0MPa ~ 1.6MPa

Nominal diameter: DN40 ~ DN600

Applicable temperature and suitable medium: according to different kinds of plastic

Main component material: gray cast iron

Executive standard: GB/T8937-2010

Test standard: GB/T13927-2008

121412_副本.jpg

 

MetInfo enterprise content manager system | MetInfo CMS

 

MetInfo enterprise content manager system | MetInfo CMS

 

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS

MetInfo enterprise content manager system | MetInfo CMS